PHC10 Anti-SPY RF Signal Detector

Professional Counter-Surveillance & Wireless Threat Detection System

The TFN PHC10 is a portable full-spectrum wireless signal detector developed for technical surveillance countermeasure (TSCM) operations, field inspections, and secure facility protection. Designed to identify hidden wireless transmitters, covert cameras, GPS trackers, and unauthorized RF activity, it provides reliable detection coverage from 1MHz to 6GHz across modern civilian and tactical communication bands.

Built around high-sensitivity RF detection and real-time spectrum analysis, the PHC10 enables security personnel, military operators, and technical inspection teams to rapidly locate suspicious transmissions in complex electromagnetic environments. Its compact form factor and rugged aluminum enclosure make it suitable for both mobile deployment and routine security inspections in sensitive facilities.

Full-band wireless signal detection from 1 MHz to 6 GHz
Detection of 2G / 3G / 4G / 5G, Wi-Fi, Bluetooth, GPS, and RF transmitters
Real-time spectrum analysis with visual signal monitoring
High-sensitivity receiver for low-power and intermittent signals
Portable aluminum housing for field deployment
Event recording and SD card data export

Description

Designed for Modern Counter-Surveillance Operations

Wireless surveillance threats are no longer limited to traditional RF bugs. Modern covert devices may use LTE, 5G, Wi-Fi, Bluetooth, or GPS communication modules, often operating intermittently or remaining dormant until activated remotely. Conventional signal detectors frequently struggle to identify these low-power or burst transmissions in environments crowded with legitimate wireless traffic.

The PHC10 addresses this challenge through wideband spectrum coverage and continuous RF monitoring. Operators can observe real-time signal activity directly on the integrated display, quickly distinguishing abnormal transmissions from normal environmental signals. This significantly improves inspection efficiency during room sweeps, vehicle inspections, executive protection tasks, or classified-site security checks.

Accurate Signal Localization in Complex RF Environments

In dense urban or tactical environments, identifying the exact source of a suspicious transmission is often more difficult than simply detecting its presence. The PHC10 combines high receiver sensitivity with directional signal analysis to help operators narrow down emission sources efficiently.

This capability is particularly valuable when searching for:

Hidden Wi-Fi cameras concealed in office equipment or fixtures
GPS tracking devices installed inside vehicles
Unauthorized wireless hotspots or rogue transmitters
Covert audio surveillance devices using cellular modules
Illicit Bluetooth or short-range RF transmitters

The visual spectrum interface allows technicians to monitor signal variations in real time while physically moving through an inspection area, enabling practical source localization without requiring bulky bench-top equipment.

Portable Platform for Field Security Teams

Field inspections often require rapid deployment across multiple locations within limited time windows. Weighing less than 350g, the PHC10 is optimized for mobile operations and can be carried easily during patrols, VIP security tasks, checkpoint inspections, or temporary site sweeps.

Its aluminum enclosure improves durability during transportation and outdoor use, while the simplified interface minimizes operator training requirements. Detection logs and signal events can be stored locally and exported through the SD card interface for documentation, post-analysis, or compliance reporting.

Specifications

Model	PHC10
Frequency Range	1 MHz to 6 GHz. Adjustable capture bandwidth.
Resolution Bandwidth	800 kHz
Dynamic Range	Cellular signals: −90 to −20 dB Spectrum signals: −70 to −20 dB
Sensitivity	Maximum -90 dBm
Sampling Rate	37 GS/s
Display	5-inch TFT Color
Battery Life	2 hours
Material	Aluminum housing
Dimensions	1467823 mm
Weight	350 g

Download Product Documents

Applications Scenarios

Tactical Command Post Security Inspection

Temporary command posts and forward communication centers are highly vulnerable to covert wireless surveillance during deployment. Commercially disguised transmitters or cellular-enabled listening devices may be introduced through maintenance equipment, power adapters, or nearby vehicles.

Using the PHC10 before operational activation allows inspection teams to scan the entire RF environment for abnormal emissions, identify suspicious uplink activity, and verify that no unauthorized transmitters are operating within the command perimeter.

Military Vehicle Anti-Tracking Inspection

Modern GPS trackers are increasingly compact and can remain in standby mode for extended periods before transmitting location data periodically through LTE or GSM networks. These devices are difficult to locate visually during routine vehicle checks.

The PHC10 enables security personnel to perform close-range RF sweeps around transport vehicles, logistics assets, and VIP convoys to detect intermittent tracking signals and identify hidden positioning devices before deployment or transit.

Secure Meeting Room & Intelligence Facility Sweeps

Conference rooms used for operational planning, procurement discussions, or intelligence coordination may become targets for covert wireless surveillance devices hidden inside lighting systems, smoke detectors, wall outlets, or office electronics.

By monitoring real-time spectrum activity, operators can isolate unusual RF patterns inconsistent with normal building communications and conduct targeted physical inspections, reducing the risk of information leakage during sensitive meetings.

Border Security & Checkpoint Signal Inspection

At border checkpoints or temporary security control points, unauthorized wireless communication devices may be used for remote coordination, surveillance, or illegal tracking activities.

The PHC10 can be deployed during vehicle or cargo inspections to identify hidden wireless emissions from concealed electronics, unauthorized hotspots, or covert communication modules operating across cellular and ISM frequency bands.

Frequently Asked Questions

Can the PHC10 detect hidden cameras that use Wi-Fi or 4G transmission?

Yes. The device is capable of detecting wireless camera transmissions operating on common 2.4GHz, 5.8GHz, LTE, and 5G communication bands, including many concealed IP cameras and remotely accessible surveillance devices.

Is the PHC10 suitable for military or government RF security inspections?

The PHC10 is designed for professional TSCM and security inspection applications where rapid identification of unauthorized wireless activity is required in sensitive operational environments.

Can the detector identify GPS tracking devices on vehicles?

Yes. The system can detect RF activity associated with many GPS tracking devices, particularly models that periodically transmit location data through GSM, LTE, or other wireless communication networks.

Does the PHC10 work in environments with heavy wireless traffic?

Yes. The integrated real-time spectrum display helps operators distinguish suspicious transmissions from normal ambient RF activity, improving usability in offices, hotels, urban environments, and communication facilities.

Can inspection data be exported for reporting purposes?

Detection events and signal records can be stored locally and exported through the SD card interface for technical analysis, documentation, or security reporting workflows.